Skip to content

OpenCreator logo

OpenCreator

Open-source custom firmware for the FlashForge Creator 5 and Creator 5 Pro.

Kalico (Klipper) on the printer, a real toolchanger you control, AFC filament handling and Fluidd or Mainsail, all on the hardware you already own. Every part is open source and can be changed.

Get started Latest release Discord How we're different

Running a Raspberry Pi or another SBC? OpenCreator for SBC runs the same stack there, with the printer's boards tunnelled over USB. Want to stay close to stock? OpenCreator Legacy works around FlashForge's software instead of replacing it.

Why OpenCreator?

  • Kalico on the printer


    A Klipper fork with MPC heater tuning, input shaper graphs drawn on the printer, power loss recovery and timelapse.

  • A real Klipper toolchanger


    Switch heads with T0–T3 with no extra software, load several tools in one go, and calibrate one nozzle without redoing all four. See how fast it changes

  • Filament that knows itself


    AFC with toolchanger support, ACE Pro auto feed and load, and material and colour synced into OrcaSlicer like an AMS.

  • Fluidd, Mainsail and GrumpyScreen


    Full web control, so the touchscreen is optional. A faster camera stream, SFTP and 3MF uploads come with it.

  • Open and editable


    Plain Klipper configs, toggles for every behaviour and a plugin system. Every repository is on GitHub.

  • Active community


    Developers and Creator 5 owners in one place, for help, testing and what's next. Join the Discord

Pick your edition

  • OpenCreator CFW


    Replaces FlashForge's software with Kalico, Moonraker and a web UI on the printer's own computer. The full feature set.

  • OpenCreator for SBC


    The same stack on a Raspberry Pi or other SBC, for more speed and room than the printer's MIPS board.

  • OpenCreator Legacy


    Keeps the stock experience and adds comforts like a better camera. A slight change that really doesn't do much.

Development software

Don't treat any full custom firmware from us as complete. What you've seen from reviews, videos, or anything related outside of this wiki may be out of date, different, or not working.

Not sure which one? Is OpenCreator CFW for you? walks through what you gain and what you give up. The feature list and status and roadmap show what's finished and what's still in testing.

On the printer

OpenCreator boot logo on the Creator 5 screen GrumpyScreen home screen with all four extruders, bed and chamber GrumpyScreen spool page with the four spools and their materials

Warranty and responsibility

OpenCreator's team and contributors take no responsibility for damage, wear or anything else that happens to your printer. If you brick or break it, that's on you, and installing mods may void your warranty. Be careful!