Installation and safety¶
OpenCreator CFW is in public alpha. Download the latest release on GitHub.
Alpha
This is an alpha. Expect bugs, keep a backup, and know how to go back to stock. Report problems on the Discord.
CFW is installed with the OpenCreator Installer, a touchscreen app that backs up the printer before changing anything. If you want a mostly stock printer instead, use the Legacy path and its own instructions.
Supported FlashForge firmware¶
OpenCreator supports every FlashForge firmware version released for the Creator 5 and Creator 5 Pro, from 1.7.8 up to the latest, 2.0.0. You don't need to update or downgrade before installing.
| FlashForge firmware | Kernel package |
|---|---|
| 1.7.8 to 1.9.7 | 2.0.1 to 2.0.5 |
| 1.9.8 | 2.0.6 |
| 1.9.9 | 2.0.7 |
| 2.0.0 | 2.0.8 |
A newer FlashForge release with a new kernel needs an installer update first; until then the installer stops without changing anything. See Supported kernel packages.
Requirements for USB¶
- FAT32 Partition
- At least 4GB in size
- USB is recommended to have at least 8GB for the backup step
Requirement for printer¶
- A printer that has at least 200MB on the prog partition and 1gb of storage on the data partition
- A printer that has an active and stable internet connection of at least 1 mbps
Steps to install OpenCreator¶
- Download the zip from the latest release and extract it to the root of the USB drive
- Reboot the printer with the USB plugged in
- Go through the steps, SoC installs are recommended for people who don't know what tunneled is
- Wait about 15-30 minutes for things to install (Backing up takes the longest)
- After it is finished, it will prompt you to remove the USB drive and press the reboot button
- Once you reboot, you should see a new boot logo, and Grumpyscreen, and on the web under the printer IP, Fluidd.
- Set up your slicer for OpenCreator: follow Slicer Configuration before your first print.
Steps to update OpenCreator¶
There are two ways.
Way 1: Fluidd/Mainsail¶
Fluidd and Mainsail have a way for smaller updates that don't effect most packages on the printer.
- Navigate to the software update section
- Update "OpenCreator" then "Klipper"
- Reboot via switch or host restart
Way 2: OpenCreator Installer Update¶
Sometimes an update can't be distributed like that, this is the other way for more major updates.
- Load the update by copying files overtop the existing files
- Plug in the USB drive and reboot
- Update with backups or without backups (Backups will make it last significantly longer and are not required for updates)
- Restart when it prompts you
Uninstalling OpenCreator¶
To uninstall OpenCreator and go back to bone stock, launch the installer, and follow instructions for a full rollback
Files left over
There are some files left over from uninstalling, they can be removed via
/usr/data/opencreator
/usr/data/grumpyscreen
/usr/data/python-hf
Moonraker will also be updated, and will have to be reinstalled if you go back to stock, you'll have to find the download for the old version.
If you uninstall OpenCreator and you picked Fluidd, you'll have to revert Nginx to stock configs.
The SSH login banner doesn't need cleaning up: a rollback removes it, and it turns itself off whenever FlashForge's firmware is back in place.
Restoring the stock boot logo¶
The OpenCreator boot logo will be removed when you use the full-rollback option. Here's a way if you do it via normal software updates.
- Download the stock logo
- Copy it over
/usr/prog/logo.jpegon the printer, keeping that file name - Reboot the printer
